| Model No. | Machine | Characteristics | Applications | Conditions | Attentions |
| CF3.1 | narrow-web press | - Fine definition.
- Good halftone effects.
- High gloss on board coverage.
- Special-purpose foil for cold foiling without die.
| - Applicable on suitably modified reel-to-reel label presses, ex. Gallus, Mark Andy, Nilpeter…presses.
- Applicable on a wide range of non-absorbent surface papers and all types of label, stock, ex. PP, PE.
- Label films：3.0-6.0 g/m2
- Non-absorbent surface papers：3.0-8.0 g/m2
| Wet process：
25-40 m/min。with higher than 230 watts/cm (600 watts/inch) UV lamp. | - Ensure that you use an appropriate adhesive, ex. XSYS、Paragon、JS、Northwest…cold foil UV adhesives.
- Adjust the adhesive lay-down to suit the substrate.
- Ensure the nip roller hardness is between 85 to 90 shore hardness.
|
| CF3.3 | narrow-web press | - High operating speed.
- Fine definition with easy release.
- High gloss on board coverage.
- Less cold foil UV adhesive quantity demand.
- Over-printable with both conventional and some of UV inks.
- Special-purpose foil for cold foiling without die.
| - Applicable on suitably modified reel-to-reel label presses, ex. Gallus, Mark Andy, Nilpeter…presses.
- Applicable on a wide range of non-absorbent surface papers and all types of label stock, ex. PP, PE….
- Label films：2.5-5.0 g/m2
- Non-absorbent surface papers：4.0-7.0 g/m2
| Wet process：
50-90 m/min。with higher than 180 watts/cm (450 watts/inch) UV lamp. | - Ensure that you use an appropriate adhesive, ex. XSYS、Paragon、JS、Northwest…cold foil UV adhesives.
- Adjust the adhesive lay-down to suit the substrate.
- Ensure the nip roller hardness is between 85 to 90 shore hardness.
|
| CF4.2 | narrow-web press | - Over-printable with both conventional and most of UV inks.
- Holographic effect.
- Fine definition with consistent release.
- High gloss on board coverage.
- High operating speed.
- Special-purpose foil for cold foiling without die.
| - Applicable on suitably modified reel-to-reel label presses, ex. Gallus, Mark Andy, Nilpeter…presses.
- Applicable on a wide range of non-absorbent surface papers and all types of label stock, ex. PP, PE….
- Label films：3.0-6.0 g/m2
- Non-absorbent surface papers：5.0-8.0 g/m2
| Wet process：
40-70 m/min。with higher than 230 watts/cm (600 watts/inch) UV lamp. | - Ensure that you use an appropriate adhesive, ex. XSYS、Paragon、JS、Northwest…cold foil UV adhesives.
- Adjust the adhesive lay-down to suit the substrate.
- Ensure the nip roller hardness is between 85 to 90 shore hardness.
|
| CF4.6 | narrow-web press | - Over-printable with both conventional and most of UV inks.
- Fine definition with consistent release.
- High gloss on board coverage.
- Special-purpose foil for cold foiling without die
| - Applicable on suitably modified reel-to-reel label presses, ex. Gallus, Mark Andy, Nilpeter…presses.
- Applicable on a wide range of non-absorbent surface papers and all types of label stock, ex. PP, PE….
- Label films：3.0-6.0 g/m2
- Non-absorbent surface papers：5.0-8.0 g/m2
| Wet process：
40-80 m/min。with higher than 180 watts/cm (450 watts/inch) UV lamp. | - Ensure that you use an appropriate adhesive, ex. XSYS、Paragon、JS、Northwest…cold foil UV adhesives.
- Adjust the adhesive lay-down to suit the substrate.
- Ensure the nip roller hardness is between 85 to 90 shore hardness.
|
| CF5.0 | sheet-fed offset press | - Special-purpose foil for the sheet-fed offset cold foil stamping applications by conventional adhesive.
- High operating speed (over 10,000 sheets/hr, up to 18,000 are possible).
- Fine definition with easy release.
- Suitable for fine line and halftone effects.
- Suitable for large area transferring.
- High gloss.
- Good over printability with more conventional and some UV inks (previous test recommended).
| - Applicable on a wide range of coated paper /folding carton and plastic materials (PE, PP, PET), or other substrates with non-absorbent surfaces.
- Applicable on the offset presses with cold foil module.
- Cold foils may be used on following applications:
- Graphic Arts: books, magazines, advertising posters, card…
- Packaging: cosmetic/cigarette/food boxes.
- Labeling: wine/champagne/liquor/cosmetic labels.
| N/A | - Carefully test the appropriate adhesive for your particular job, ex. Zeller+Gmelin.
- Euralux: O0830/O0832 (gold foils) and O0831/O0833 (silver foils); printcom: S502O (silver foils) and S501O (gold foils); Epple Druckfarben: Cold Foil Adhesive 1783 (silver foils) and 1790 (gold foils).
- Adjust the adhesive lay-down to suit the substrates. Optimized adhesive application level: 1.5-4 g/m2 dependent on the substrates.
|
| UCF5.0 | sheet-fed offset press | - Special-purpose foil for the sheet-fed offset cold foil stamping applications by UV adhesive.
- High operating speed ( over 10,000 sheets/hr, up to 18,000 are possible).
- Fine definition with easy release.
- Suitable for fine line and halftone effects.
- Suitable for large area transferring.
- High gloss.
- Good over printability with most conventional and some UV inks (previous test recommended).
| - Applicable on a wide range of coated paper /folding carton and plastic materials (PE, PP, PET), or other substrates with non-absorbent surfaces.
- Applicable on the offset presses with cold foil module.
- Cold foils may be used on following applications：
- Graphic Arts: books, magazines, advertising posters, card…
- Packaging: cosmetic/cigarette/food boxes.
- Labeling: wine/champagne/liquor/cosmetic labels.
| N/A | - Carefully test the appropriate adhesive for your particular job, ex. Zeller+Gmelin.
- Uvalux：Uvalux: U0830 (gold foils) and U0832 (silver foils); TOYO INK: FD IF UV Glue; T&K：UV糊SPP-BK
- Adjust the adhesive lay-down to suit the substrates. Optimized adhesive application level: 1.5-4 g/m2 dependent on the substrates.
|
| CF5.1 | sheet-fed offset press | - Special-purpose foil for the sheet-fed offset cold foil stamping applications by conventional adhesive.
- High operating speed ( over 8,000 sheets/hr, up to 12,000 are possible).
- Holographic effect.
- Fine definition with easy release.
- High gloss and suitable for large area transferring.
- Good over printability with most conventional and some UV inks (previous test recommended).
| - Applicable on a wide range of coated paper /folding carton and plastic materials (PE, PP, PET), or other substrates with non-absorbent surfaces.
- Applicable on the offset presses with cold foil module.
- Cold foils may be used on following applications：
- Graphic Arts: books, magazines, advertising posters, card…
- Packaging: cosmetic/cigarette/food boxes.
- Labeling: wine/champagne/liquor/cosmetic labels.
| N/A | - Carefully test the appropriate adhesive for your particular job, ex. Zeller+Gmelin.
- Euralux: O0830/O0832 (gold foils) and O0831/O0833 (silver foils); printcom: S502O (silver foils) and S501O (gold foils); Epple Druckfarben: Cold Foil Adhesive 1783 (silver foils) and 1790 (gold foils).
- Adjust the adhesive lay-down to suit the substrates. Optimized adhesive application level: 1.5-4 g//m2 dependent on the substrates.
|
| UCF5.1 | sheet-fed offset press | - Special-purpose foil for the sheet-fed offset cold foil stamping applications by UV adhesive.
- High operating speed ( over 8,000 sheets/hr, up to 12,000 are possible).
- Holographic effect.
- Fine definition with easy release.
- High gloss and suitable for large area transferring.
- Good over printability with most conventional and some UV inks (previous test recommended).
| - Applicable on a wide range of coated paper /folding carton and plastic materials (PE, PP, PET), or other substrates with non-absorbent surfaces.
- Applicable on the offset presses with cold foil module.
- Cold foils may be used on following applications：
- Graphic Arts: books, magazines, advertising posters, card…
- Packaging: cosmetic/cigarette/food boxes.
- Labeling: wine/champagne/liquor/cosmetic labels.
| N/A | - Carefully test the appropriate adhesive for your particular job, ex. Zeller+Gmelin.
- Uvalux: U0830 (gold foils) and U0832 (silver foils); TOYO INK: FD IF UV Glue; T&K：UV糊SPP-BK
- Adjust the adhesive lay-down to suit the substrates. Optimized adhesive application level: 1.5-4 g//m2 dependent on the substrates.
|
| * Roll format: Various roll formats are available upon request! |
